Take 10 Minutes to Get Started With BEST ROOFING COMPANIES

When was the last time the roof of your building was inspected? If it’s been awhile, the roof may have problems lurking that require immediate attention. Some roof problems cause obvious signs such as leaks, while others produce subtle signs which are only detectable on the surface. In either case, leaving the problems unaddressed can cost you thousands when you finally repair them. If the roof on your own building has any of the problems listed below, an organization that focuses on commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle because of weather damage and poor installation. Whatever the cause, the buckling allows wind to blow within the panels, making them loose. As the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels in place. This creates an area where water can leak within the panels and soak the roof deck. Once the deck becomes saturated, the thing is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof long beach commercial roofing systems to blister. Although small blisters seldom pose a problem, large ones can rupture and invite water to seep beneath the bitumen. Once the blisters form, warm weather typically makes them worse. Due to the humid subtropical climate in some regions of the united states, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping can cause water to assemble in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more technical. Often, installing a taper insulation system to determine a new slope is the best solution. During the rainy season, resolving ponding water is among the most common types of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as for example chimneys and vents. Over time, most flashing must be resealed. If it’s not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.

Missing Mortar

Chimneys and high parts of brick walls that have parts of missing mortar may cause leaks. These leaks are often recognised incorrectly as leaks in the roof membrane, but an intensive inspection by a company that specializes in commercial roofing will reveal the real problem. Most parts of missing mortar can be repaired with basic tuck pointing procedures.

Conclusion

The problems above are a few of the most common known reasons for roof repair. If they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the foremost way to ensure problems are detected early.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *